| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MHC-1060/1080 Automatic Die Cutting and Creasing Machine is key equipment for printing finishing such as die cut, crease and embossing etc. Unique drive gears are adopted such as high-precision indexing mechanism, pneumatic closed up, pneumatic clutch, overload protection, automatic compression relief etc., to ensure stable and high speed running of the machine. This machine is equipped with practical and reliable mechanisms such as pre-stack device, secondary delivery mechanisms, manual sampling, etc., which ensure the excellent performance of the machine. Electrical components and driving elements of internationally known brands to ensure die cutting precision and reliability of running. Also man-machine interface is able to monitor machine running status, trouble shooting and indicating relevant help information which fully actualizes man-machine communication.
Feeding Unit
01. Monolithic conveying section wall panel of ductile iron
02. Fish scale type strong paper suction head, 4 suction and 4 feed, the suction head can adjust various paper suction Angle according to the deformation of paper
03. Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment
04. Three feida head anti-collision devices
05. Horizontal paper parting and blowing device
06. The main and secondary stacking paper table does not stop alternately, feida non-stop operation, the maximum pile of paper height 1600mm
07. Main electric left and right trimming device for paper feed stack
08. The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feita
09. Push-pull side gauge, one set for operation side and one set for transmission side. Side gauges can be adjusted between push and pull gauges to meet different paper requirements
10.Side gauge, front gauge paper photoelectric detection
11.Paper arrives before the gauge, slow down the function of paper
12. Electromechanical double detector
13. Import paper conveyor belt and stainless steel conveyor plate
14. Pneumatic lifting device for feeding frame
15. Single point clutch: the conveying part and the main part can be separated and combined synchronously at any time, simplifying and facilitating the operation sequence. No matter the sample, test pressure, etc., can be arbitrarily separated and closed conveyor section
16. PLC and electronic CAM control the timing of the whole machine
17. Germany Baker brand blowing and suction dual vacuum pump
Die-cutting Unit
01. Nodular cast iron main body and left and right wall panels and upper platform, lower platform
02. Imported worm gear, worm with 40CR crankshaft
03. Imported worm gear, worm with 40CR crankshaft
04. Electric pressure regulating device can realize accurate pressure control through PLC touch screen keys
05. The whole set of imported anodized aluminum alloy tooth row and positioning structure 5 groups, each tooth row adopts adjustable tooth row structure
06. Import main drive chain
07. Imported intermittent divider
08. Imported synchronous belt, belt wheel drive
09. Main drive inlet pneumatic clutch brake device
10.Japanese SMC pressure detection device, pressure is too low alarm
11.Die-cut plate frame adopts center line fast positioning device structure
12.Die-cut plate frame and die-cut bottom plate are locked by Japanese SMC gas regulator, to avoid the upper plate frame lock installation is not in place, effectively avoid the loss caused by human factors operation
13.Siemens brand main motor drive
14.The whole machine adopts centralized automatic oil supply system to ensure that the transmission part is not short of oil
15.Equipped with air storage tank to ensure the stable air pressure
Delivery Unit
01. Adjustable mechanical paper receiving brush and paper pressing mechanism to help the teeth discharge paper and stack
02. Paper collecting and paper leveling device
03. Photoelectric detection of the upper and lower limit switch prevents the paper from being piled too high and the paper from being rolled up
04. Plug rod type auxiliary paper receiving frame, can realize non-stop machine paper receiving
05. Paper receiving bidirectional auxiliary blowing, manual sampling mechanism, easy to operate
Electrical Parts
01. Huichuan PLC control system
02. The die-cutting part adopts 10.4 - inch touch screen
03. All the machines adopt relays, AC contactors, air switches and buttons made by Moeller from Germany to ensure the stability and reliability of electrical parts
04. The whole machine adopts Japanese Omron photoelectric switch, optical fiber, encoder and sensor, to ensure the accuracy and stability of electrical detection of each part of the action
| Model | MHC-1060 | MHC-1080 |
| Maximum Sheet Size | 1060×760mm | 1080×780mm |
| Minimum Sheet Size | 400×350mm | 400×350mm |
| Maximum Cutting Size | 1050×750mm | 1070×770mm |
| Minimum Gripper Margin | 9-17mm | 9-17mm |
| Inner Chase Size | 1100×790mm | 1100×790mm |
| Stock Range | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm | Paper: from 90 to 2000g/m2, 0.1~2mm, corrugated board: up to 4mm |
| Die Cutting Accuracy | ≤±0.1mm | ≤±0.1mm |
| Max.die Cutting Force | 300T | 300T |
| Max.working Speed | 7500s/h | 7500s/h |
| Max. Feeder Pile Height | 1600mm (With wooden pallet) | 1600mm (With wooden pallet) |
| Max. Delivery Pile Height | 1400mm (With wooden pallet) | 1400mm (With wooden pallet) |
| Machine Dimensions | 6286×4257×2367mm (L×W×H) (L: paper prepared track included, W: platform included) | 6286×4257×2367mm (L×W×H) (L: paper prepared track included, W: platform included) |
| Net Weight of Machine | 16T | 17T |
| Main Motor Wattage | 11kw | 11kw |
| Full Load Wattage | 16.9kw | 16.9kw |
| Air Requirement | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min | Pressure: 0.6~0.7Mpa, Flow: ≥0.37m3/min |
){kind=link}