High-Speed Flexographic Printing Machine (WS884ZZ-1000ZS)

• Model NO.: WS884ZZ-1000ZS
• Doctor Blade: Single Doctor Blade
• Transport Package: Wooden Case
• Specification: CE
• Trademark: AOCHI
• Origin: China (Mainland)
• HS Code: 84431600
• Production Capacity: 20 Set/Sets Per Month

Product Description

High-Speed Flexographic Printing Machine (WS884ZZ-1000ZS)






Major configuration:
1. Flexographic Printing Machine should have one unwind and one rewind
2. Low speed and full load startup; Stable running by tension control when increasing and decreasing speed; Noise is decreased
3. High speed under mesh points reappearances rate high, the screen prints each level clearly demarcated, stereoscopic effect strong, the process plate is accurate
4. Uses specially makes the modulus angular gear transmission the printing size accurately, the printing specification is complete (5mm is a specification)
5. Is equipped with the convulsion to catch a chill gives off heat three sets of equipments, in which gives off heat uses the central constant temperature control system and the grouping control has the cold wind to finalize the installment in addition
6. The operation is easier and more convenient, the register is more accurate, and the lifespan is also longer
7. Inking motor can be stopped and started antomatically when lifting the printing plate system
8. The type of providing the ink is smearing the ink with plastic roller and anilox roller
9. The specially-made vertical gear transmission which present the accurate printing size
10. Fix with the blower and the heater including the heater employing the central constant temperate controlling system
11. The grouped and controlled bottom roller processed with Germany particular steel materials processed with special techniques and electrically gilded with 0.1mm hard chromium protective layers
12. Aluminum alloy wheels are hard oxidized and processed with dynamic and static balancing
13. Material holder use air shaft
14. Vapor tension to auto heave material
15. Auto tension control
16. Use the PLC programmable control
17. Touch screen interface to operate
18. Pneumatic hydraulic pressure auto deviation correction system.
19. Surface rewind with web unload by pneumatic pushing bar
20.1 set of printing cylinder, sizes: 15 inches.
21. Able to print 4 colors pictures CMYK.

Specification For The Flexographic Printing Machine:
Printing width: 900mm
Web path width: 1000mm
Printing length (repeat) :190 ~ 850mm (7.5"~ 34")
Highest machine speed: 100 meters/per minute
Highest printing speed: 80 meters/per minute
Plate thickness: 1.7mm
Anilox roller: 600LPI 4PCS
Register precision Longitude: ± 0.10mm
Transverse: ± 0.10mm
Unwind reel diameter: Φ 1200mm
Rewind reel diameter: Φ 1200mm
Tension scope: 3 ~ 50kg
Tension precision: ± 0.2kg (Japan Mitsubishi)
Unwind and rewind web cylinder: Φ 76mm (inner diameter)
Unwind and rewind material holder: Air shaft
Air supply: 0.6mpa
Trapping roller Pneumatic control, max. Power: 150kg (Japan SMC)
Doctor blade: One side enclosed type
Inking Auto cyclic system, one diaphragm pump
Inking distributing deceleration motor (reduction ratio 1: 50)
Drying model: Electric heating /Infrared(hot air)
Drying power: 24kw
Air blower (large): 1.5kw / 2 PCS
Air blower (small): 180W / 8 PCS
Master motor power :5.5kw (reduction ratio 1: 5)
Machine power: 35kw
Outline size: 6.8m× 2.2m× 2.7m
Deviation correction system :Auto hydraulic pressure
Printing plate lifting system: Auto hydraulic pressure China
PLC Taiwan
Touch screen Taiwan
Tension control Japan
Conventional bearing Japan
Unidirectional bearing Germany
Frequency conversion controller Japan
Acceptable printing material:
Single filter membrance paper: 60~ 280G/M2
Double filter membrance paper: 60~ 280G/M2
Paper: 60~ 280G/M2